home *** CD-ROM | disk | FTP | other *** search
- Path: dd.chalmers.se!news.chalmers.se!sunic!pipex!howland.reston.ans.net!europa.eng.gtefsd.com!tsg.com!rpi!ghost.dsi.unimi.it!univ-lyon1.fr!taloa.unice.fr!taloa.unice.fr!beust
- From: beust@sophia.inria.fr (Cedric Beust)
- Newsgroups: comp.sys.amiga.programmer
- Subject: Re: DOS Device
- Date: 14 Dec 1993 09:03:57 GMT
- Organization: INRIA Sophia-Antipolis. FRANCE
- Lines: 25
- Message-ID: <BEUST.93Dec14100358@indri.inria.fr>
- References: <80012135@prox.stgt.sub.org> <CHz9EJ.Myn@unx.sas.com>
- NNTP-Posting-Host: indri.inria.fr
- Mime-Version: 1.0
- Content-Type: text/plain; charset=iso-8859-1
- Content-Transfer-Encoding: 8bit
- In-reply-to: walker@twix.unx.sas.com's message of Mon, 13 Dec 1993 14:25:27 GMT
-
-
- In article <80012135@prox.stgt.sub.org>, "Boris Folgmann" <Boris@prox.stgt.sub.org> writes:
- |> I need to write an own DOS handler.
- |>
- |> - How is it done?
- |> - Is there an easy way to do it with the new SAS/C 6.50?
- |> - Is some linkable code provided to do it easy? How does it works?
- |> - Is it possible to incorporate my device in my program, that means to
- |> mount it when the program starts and to remove it when the program exits?
- |> (I think Edge from Innovatronics does the same)
-
- You will find an article that might help you on :
-
- /anonymous@avahi.inria.fr:/amiga/programming-a-device-article
-
- I'm currently finishing an article on handlers too (I'm not the
- author of the device article). I will announce it here when it's
- ready and proofread.
-
- --
- Cedric BEUST, beust@sa.inria.fr, Bull Research Koala project
- Pho:(33) 93.65.78.11(.65 Fax), INRIA, B.P.93 - 06902 Sophia Antipolis, FRANCE.
-